Application Areas

It is suitable for all types of areas, whether open or closed, such as stadiums, construction sites, factories, ministries, campus entrances, sports fields, production facilities, banks, and gas stations.

Material

The T 2500 D Single ECO turnstile is produced in 304 stainless steel or in various colors with electrostatic paint. Optionally, 316 stainless steel can be used, or the rotor part can be made of stainless steel while the outer casing is painted. Some critical parts of the turnstile mechanism are produced in Makim’s manufacturing facilities using special investment casting technology. This ensures the system's impact resistance and trouble-free operation for many years. Thanks to the control boards developed by Makim engineers, the T 2500 D Single ECO turnstile can operate in many different modes and connections.

General Use

The T 2500 D Single ECO turnstile can be produced in single and double configurations. In areas where multiple turnstiles will be used, double models will be more economical. The passage range can be provided in either 3 or 4 arms (in 120° or 90° intervals) as desired. Bidirectional passage is possible through the turnstile. Any access control device such as a card reader, fingerprint scanner, or facial recognition can be easily integrated into the turnstile via dry contact. As soon as access rights are granted, the turnstile lock is released and passage is achieved by lightly touching the arms. When the arms complete one full rotation, the turnstile locks. If passage is not made within 15 seconds after the lock is released, the turnstile first gives an audible warning and then locks again. There are LED lights on both sides of the T 2500 D Single ECO turnstile showing the direction of passage, represented by a red cross and green arrow. More than 30 passages can be made through the turnstile in one minute.

Security

In case of power failure, the T 2500 D Single ECO turnstile allows free passage in both directions. Alternatively, if a battery is used, the turnstile will continue to operate in the standard preset mode when the power is cut off.